What does it take to upgrade a 3D-printed mouse mod from version 1.0 to 2.0? With software, you usually increment the major number when you’re making a change that makes the program incompatible with the old version in some major...
Read the post →I have been patiently waiting for the release of the Corsair Sabre Pro V2. It is high-performance, ultralight gaming mouse at a reasonable price from a major manufacturer. You could probably pick one up off the counter at Best Buy,...
Read the post →I have been gaming with one of my Li’l Magnum! fingertip gaming mice for the last three months. The model I am currently using weighs 16.4 grams and is built using the internals from a VXE Mad R mouse.
Read the post →I have listed the 3D printed Li’l Magnum! mouse mod kit in my Tindie store. I would prefer that you print your own. I would be excited if you would use this as an opportunity to spend $180 on a...
Read the post →This won’t just be advice on how to successfully print a solid Li’l Magnum! mouse mod that feels right. I will also talk about things you will need to go along with your Li’l Magnum! like PTFE skates and grip...
Read the post →I said I wasn’t going to write another mouse blog right away. It is the only topic I have written about so far this year. I definitely feel like I should sneak something else in, but I can’t do it!...
Read the post →I am excited. A more affordable $22 VXE Dragonfly R1 SE Plus arrived at my door two hours ago. I disassembled it immediately and started test fitting it into one of my spare Li’l Magnum! shells for my Dragonfly R1...
Read the post →I am just going to put the tl;dr right up at the front. I wanted something like Optimum Tech’s Zeromouse. I tried the fake Logitech G304 upgrade, and it was awesome using a 29-gram mouse, but the electronics were jittery...
Read the post →UPDATE: This is a fun read, but don’t print this! I have put together a 21.5-gram fingertip mouse for the VXE Dragonfly R1 mice. This is built around a proper high-DPI, low-latency gaming mouse that starts at about $18. The...
Read the post →
