SSD Upgrade: Intel X25-M to Crucial M4

| Comments

Back in June I decided that we should put an SSD in Chris’ laptop (a.k.a. my old laptop). I ended up buying a new solid state for myself and moving my Intel X25-M into her laptop.

Shopping for an SSD this time was a very different experience. When I bought my first SSD there was really only one drive worth buying; I just had to wait until I saw the best possible price on that drive. These days the majority of solid-state drives are fast and well made. I just had to find a reasonably priced drive of the size I want and Google a bit just to make sure that it isn’t a lemon.

Show:

Version 1.03c                             ------Sequential Output------- --Sequential Input-  --Random-
                                          -Per Chr- --Block-- -Rewrite-- -Per Chr- --Block--  --Seeks--
Machine                              Size K/sec %CP K/sec %CP  K/sec %CP K/sec %CP K/sec %CP  /sec %CP
Xen Server (4x400 RAID 10)             1G 68909  97 128789 45  48402  18 55770  91 106948  24   326   0
Intel X25-M 80 GB                      8G 56415  89  87157 11  39827   9 69707  98 298590  29 16150  45
Crucial M4 128 GB                     16G   954  98 183205 20 105877   9  4858  99 327088  16  4306 120
Crucial M4 128 GB aes-256, nodiscard  16G   604  94 152764 16  63475   6  4064  98 145506   6  2380  46
Crucial M4 128 GB aes-256, pre-trim   16G   794  97  56071  6  58384   7  3861  98 121742   8 10462 167
Crucial M4 128 GB aes-256, discard    16G   724  94  28447  2  22498   2  3948  96 134872   5  2361  45
Crucial M500 480 GB aes-256           63G   483  99 406072 55 150005  34  1362  99 309761  38 +++++ +++

The Crucial M4 128 GB

I ended up settling on the Crucial M4 128 GB solid state drive. It really isn’t much of an upgrade over the Intel X25-M. It is measurably faster, but I can’t notice the difference. The leap from a traditional hard drive with glacial seek times to a solid-state drive was very noticeable. The X25 is already so fast that the incremental upgrade isn’t easy to feel.

The extra 48 GB of space is very, very noticeable. My gargantuan laptop has room for two hard drives. I was using symlinks to move some larger directories out of my SSD and onto the extra disk, mostly things like my downloads directory, virtual machine images, and larger games like Team Fortress 2.

The Intel X25 usually ran about half full because of this. Today, with all that cruft moved back to the SSD, the Crucial M4 tends to hover right around 75% full.

What the benchmarks say

First I would like to note that something has changed somewhere between my documented X25-M benchmark and today. I don’t currently know why the “per character” speeds on these benchmarks are so low. I do know that I’ve gotten similar results this year from the X25-M, but I didn’t save any of those results.

The Intel X25-M and the Crucial M4 have very comparable read performance on my SATA 2 controller. When I benchmarked the X25-M a few years ago I thought for sure it was maxing out the SATA 2 port. The Crucial M4 proved me wrong, though. It is able to eke out an extra 10%.

The Crucial M4 definitely performs writes faster than the Intel X25-M. It is too bad Bonnie doesn’t measure the small random writes that most early solid-state drives were so terrible at.

Why do I use Bonnie for benchmarks?

I’ve been using Bonnie forever. I remember some scores from almost a decade ago and I bet I could even dig some up out of old backups. I remember watching the folks from 3Ware running Bonnie benchmarks at Linux Expo back in 2001. I’m mostly still running and comparing Bonnie benchmarks for historical reasons.

The Crucial M4’s horrendous TRIM speed

At some point in the last five months I’ve encrypted my entire laptop. This is only partially relevant here because it turns out that I forgot to enable TRIM “pass through” on my encryption layer. I noticed this when my first benchmark for this article came out way slower than I thought it would. I did run a benchmark right after I encrypted the drive, but I either misplaced it or didn’t save it.

The first thing I did when I noticed this was to enable TRIM/discard everywhere I could, manually run fstrim, reboot, and ran another benchmark. That is when I got the horrible, horrible 20 to 30 MB/sec write speeds. It was so awful that I couldn’t even use the laptop while the benchmark was running.

After disabling the discard option, the write speeds improved by 300% and 500%. A freshly trimmed drive with discard turned off runs about as fast as I would hope, right around the maximum speed my CPU can perform AES-256. My laptop was still responsive during the benchmark.

I will definitely be leaving discard turned off on this drive. I’ll just have to manually run fstrim every once in a while. TRIM on the X25-M did not incur this much of a performance penalty.

Was it worth the trouble and cost of upgrading from the Intel X25-M?

No. It was not. The X25-M is still an excellent drive. My real goal here was to remove the spinning drive from another computer. If I weren’t doing that, this wouldn’t have been worth the time, effort, or money.

I firmly believe that the biggest day-to-day advantage of an SSD in a desktop computer is the vastly improved seek times. That order of magnitude leap from a 7200 RPM hard drive to an SSD is the difference you’ll be likely to notice. The other performance improvements are nice, but you’ll never notice them without a stopwatch.

If you’re still using an old-school spinning platter hard drive I think the Crucial M4 is a great value. It is quite speedy and well under a dollar per gigabyte.

Comments